PRODUCTS
General
A Remote Power Panel (RPP) provides power distribution extensions from PDUs or other power sources directly to server racks with several benefits: Distribution capacity: Your PDU may have ample power capacity, but no extra breaker or panelboard capacity.
Remote Power Panels (RPPs) are like PDUs without a transformer and are therefore smaller (about the size of a standard raised floor tile). RPPs may contain up to four panelboards and a monitoring system, and distribute power to the IT racks. RPPs are most often fed from one or more PDU sub-feed Breakers. Usually, RPPs are located in the IT space(white space area) to distribute, control, and monitor the critical power from the upstream UPS system to IT racks.
Application
Functional features
①AMC16Z-FAK24/48 Measure 24/48 channels of each circuit of A+B out line
②AMC16Z-ZA Measure A+B independent 2 circuits three-phase main into line
③RS485 communication line
④AKH-0.66W Type ct or AKH-0.66-EMS type (50,100,200400A)/50mA
⑤AKH-0.66/30I Tpye ct
⑥ATP007kt 7 InchTouch screen or ATP010kt 10 InchTouch screen
RPP Power Distribution Unit
Rated voltage Rated insulation voltage 660V Rated working voltage 220V (single phase three wire system), 380V (three phase five wire system) Rated impact withstand voltage Uimp 8kV Overvoltage class III Pollution levels Class 2 Rated frequency 50HZ Rated current Rated current 100A to 630A(configurable as request) Rated short-time withstand current 6kA EMC Electromagnetic compatibility Industrial 2 class insulation resistance ≥10MΩ dielectric strength 1min 2500V Grounding Resistance ≤0.1Ω structural characteristics Size(mm) width 600、800、1000 height 2000、2200 depth 600、800、1000、1100 oscillation specification 5Hz~50Hz,amplitude 20mm/s Cabinet color RAL9004 Surface treatment Epoxy resins electrostatic powder spraying Protection level IP20 Componenets installation in cabinet Fixed type or plug-in type Installation Floor type Installation place indoor Material specifications frame RKIII mounting plate ALZINC Door plank Mesh or glass doors Output switch 6A~63A（single phase or three phase） Output circuit 21-84 channels alarm style Audible and visual alarm Communication port RS485,RS232 and LAN(ethernet) optional Main feeder monitoring parameters Three-phase voltage, current, frequency, zero sequence current, active/reactive power, power factor,Active/reactive energy, total harmonic content, 2~15 harmonics, etc Main feeder alarm item Three phase overvoltage/undervoltage, phase deficiency, imbalance, three phase current overcurrent, zero sequence overcurrent, high/low frequency Outgoing circuit Outgoing voltage, current, load percentage, switch on/off state, etc Sub-alarm item Outgoing circuit overload warning, outgoing open circuit alarm lamp, etc Ground/zero connection Single floor row/zero row Feeder and outgoing mode Up incoming or down incoming Two circuits system Optinal Environment operating temperature -5℃ to 40℃ Relative humidity ≤93%RH(25℃±5℃时) altitude ≤2000m storage Well ventilated, temperature -25℃ ~ +55℃, relative humidity ≤85%, the surrounding environment does not contain corrosive gas, no harmful chemicals and gases in the warehouse
