1) It is equipped with channel state indicator and communication state indicator.
2) It applies both software and hardware Watchdog in order to prevent the system halting.
3)Its size is small, and easy to install.
1)Auxiliary power supply: 24VDC(±10%)
220VAV,allow AC/DC AC/DC 85~265V
2)Power consumption: ≤5W
3)Working temperature: -5℃-+55℃
4)Relative humidity: ≤95%RH, free of condensate or aggressive gases
5)Storage temperature: -25℃-+70℃
6) Altitude: ≤2500m
7)Insulating strength:2kV/1min, 50Hz between the the power supply/ relay and power supply/ communication/switching value
Note:When the auxiliary power supply is 24V, the withstand voltage between the power supply
and other terminals is 1kV
8)Installation method: installed with DIN 35mm guide rail
Property | Index | |
Switching input | Relay output | |
Input/ output circuit | 8 | 8 |
Input/output mode | Passive dry contact | 8-channel relay output (pulse or holding mode) |
Bus mode | Half-duplex RS485 (Modbus RTU),3-core shielded line recommended | Half-duplex RS485 (Modbus RTU),3-core shielded line recommended |
≤32 | ≤32 |
Bus capacity | ||
Resolution of switching event | Ability to differentiate the successive displacement of multiple contacts, displacement interval between any twocontacts: >1ms | / |
Remote communicationscanning speed | Scanning cycle of all channels: 1ms | / |
Debouncing time of remotecommunication | Debouncing time for all channels: 1ms(adjustable) | / |