1.General
ASJ Series of action relay of after-current, low-voltage circuit break or low-voltage contactor can be made up for combined after-current production device, which is mainly applied for the TT and TN system distributing circuit with the alternating current 50Hz, the rated voltage 400V or below.
2.Model and specification
technical parameter | index | |
Type A | ||
input | Rated residual action current I△n | 0.03、0.05、0.1、0.3、0.5、1、3、5、10、30(A) |
Non-driving time of limitation △t | 0、0.06、0.1、0.2、0.3、0.5、0.8、1、4、10(s) | |
Rated residual non-action current I△no | 50%I△n | |
performance characteristics | simple sinusoidal alternating current and pulsating direct current | |
frequency | 50Hz±5Hz | |
action error | -20% ~-10%I△n | |
output | output mode | one is the normal closing or opening, and the other is for the transformation |
contact capacity | AL1:8A 250VAC 5A 30VDCAL2:6A 250VAC 5A 30VDC | |
reset mode | the on-the-spot one, the long-distance one and the automatic one | |
power supply | voltage range | AC110V、AC220V、DC85-270V(permissible error±10%) |
power dissipation | ≤5W | |
power frequency withstand voltage | The effective value of alternating current between the power supply, input and output: 2kV/1min | |
under the normal operation | temperature | operating temperature: -20℃~+55℃storage temperature: -30℃~ +70℃ |
humidity | ≤95%RH, with moisture condensation, and corrosive gas place | |
height above sea level | ≤2000m | |
class of pollution | Grade three | |
installation category | Type Ⅲ |
Please refer to the table 1 and the picture 1 and 2
instrument type | Panel size (mm) | Shell size (mm) | hole size(mm) |
ASJ20-LD1A | 48×48( width by height) | 43.8×43.8×100(width by height by depth) | 45×45(width by height) |
ASJ10-LD1A | 85×54×64(length by width by height) |
ASJ20-LD1A the appearance and hole size | ASJ10-LD1A appearance and hole size of installment | ASJ10-LD1A appearance and hole size of installment |