ASL100-T2/BR microwave sensor (known as radar sensor) is an illumination and radar sensing two-in-one sensor based on Acrel-bus intelligent control system. The sensor adopts European KNX communication bus to collect the illumination in real time. When the illumination exceeds and (or) is less than the threshold of the parameter setting, it will send the corresponding command by the parameter setting. On one hand, the microwave sensor will detect the moving object according to the microwave of Doppler Effect. After the microwave sensor detects the object, it will send the corresponding control signal according to the parameter setting. In the intelligent control system, other control modules will match the sensor to intelligently control the illumination, fan and air conditioner. The module adopts the latest single-chip microcomputer technology and has features of high stability, high reliability and strong anti-interference capability and so on.
2. Specification and model
3. Technical parameters
Power supply feature
KNX bus feeder
DC21~30V
Power supply current
<12mA
Power consumption
<360mW
External connection
KNX-TP1
Use twisted-pair cable conforming to KNX standard
Wiring terminal at load end
Terminating with 0.5nm~0.6nm torque
Operation and display interface
Programming key and relevant indicator
LED indicator is in red when waiting for programming and is in green during and after programming.
Temperature range
Operating temperature
-5℃~+45℃
Storage temperature
-25℃~+55℃
Transport temperature
-30℃~+70℃
Environmental requirements
Maximum air humidity
95%
Dimension (mm)
Φ76.2x40.7
安装Installation
Embedded embedded
2. Configuration
Installation notes: the product is easy to install and is embedded. The installation hole size of the sensor is ψ58mm. During installation, the product is fixed by the leaf springs on both sides. KNX bus is connected by the bus terminal and other modules.