ASL100-P640/30 bus power module (hereinafter referred to as power supply) is a bus power supply based on Acrel-bus intelligent control system. All control modules on the bus are coupled with the power supply by the choker in the power supply. This product meets the enterprise standard Q31/0114000129C032-2017 ASL100 Intelligent Lighting Control System. The bus is connected by the standard EIB wiring terminal and standard KNX bus. After the reset key on the module is pressed, the power supply will be reset for 20s (the bus power supply is disconnected and the auxiliary power supply normally provides the power supply during reset period) and the bus and power supply are disconnected physically. If the power supply needs to be cut off for more than 20s during use, the power line needs to be cut off. This model of module is also attached with a 30V DC auxiliary output power supply. This auxiliary power supply may power on the external power module, such as IP module and touch screen and so on.
2. Specification and model
Power input | Input voltage | 85—265V AC 50/60Hz |
Power consumption | <5W | |
Efficiency | ≥75% | |
Power output | Bus power supply | 30V DC Built-in choking coil output |
Auxiliary power supply | 30V DC No choking coil output | |
Output current | Bus current+auxiliary current≤640mA | |
External connection | KNX-TP1 | Use twisted-pair cable conforming to KNX standard |
Wiring terminal at load end | Terminating with 0.5nm~0.6nm torque | |
Operation and display interface | Programming key and relevant indicator | LED indicator is in red when waiting for programming and is in green during and after programming. |
Temperature range | Operating temperature | -5℃~+45℃ |
Storage temperature | -25℃~+55℃ | |
Transport temperature | -30℃~+70℃ | |
Environmental requirements | Maximum air humidity | 95% |
Dimension (mm) | 108x90x69 | |
Installation | Standard 35mm track installation |
Model | length [B] |
ASL100-P640/30 | 108mm |