ASL100-TD2/5 silicon controlled dimming driver (hereinafter referred to as dimmer) is the dimming module of Acrel-bus intelligent control system. European KNX communication bus is adopted to achieve intelligent lighting control of large buildings and public buildings. The latest single-chip microcomputer technology is adopted by the dimmer. The dimmer is the intelligent control module with high stability and reliability and matches other control modules, such as smart panel and dry node, to achieve the intelligence of lighting control. The dimmer dims LED by directly controlling high voltage part. 30V DC voltage is used for module power supply at the communication end and is used for system communication.
2. Specification and model
2. Technical parameters
Power supply feature
KNX bus feeder
DC21~30V
Power supply current
<12mA
Power consumption
<360mW
Load current
Max 5A
External connection
KNX-TP1
Use twisted-pair cable conforming to KNX standard
Wiring terminal at load end
Terminating with 0.5nm~0.6nm torque
Operation and display interface
Programming key and relevant indicator
LED indicator is in red when waiting for programming and is in green during and after programming.
Temperature range
Operating temperature
-5℃~+45℃
Storage temperature
-25℃~+55℃
Transport temperature
-30℃~+70℃
Environmental requirements
Maximum air humidity
95%
Dimension (mm)
72x90x62
Installation
Standard 35mm track installation
4. Configuration
Model
length [B]
ASL100-TD2/5
72mm
Installation notes: the module is applicable to 35mm track installation. It is ok to clamp the dimer into the track. The output terminal is connected with the load and KNX bus is connected with other modules by the bus terminal.